Here we'll answer some FAQs regarding Installation and Mounting.
The different installation spots will affect the installation angle. In principle, the panel should face directly toward the sun in order to generate maximum power. However, adjustments can be made based on the actual situation. You can even make adj
A solar panel has many different mounting options available, depending on your application. You can hard-mount rigid panels using some mounting brackets. Then, when it comes to semi-flexible panels, you can practically mount those anywhere you so des
Since mounts are to be used outdoors, their waterproof grade is relatively high. The conventional one is galvanized carbon steel and anodized aluminum oxide. We sell anodized aluminum brackets as they are not susceptible to corrosion.
No, they are not. You can decide whether you need the mounts. To reinforce the panel, it is recommended to use the appropriate mounting systems. Please refer to the “Mounts” section on our website. https://www.newpowa.com/products/mounts/
It is not recommended for people to design and manufacture mounts, except for professionals. Every component of the mounting system has been carefully designed to meet the installation requirement. In the meantime, the mounting system needs to withho
(1) There should be some room left between the panel and the RV’s rooftop for ventilation. (2) The available room on RV’s rooftop should be considered when choosing the panel. Full advantage of the available room should be taken to compensate for the
(1) Check the connection before using a foldable unit. (2) The sitting position should be kept as stable as possible. Face the glass directly towards the sun. The tilt angle can be adjusted based on the actual conditions.